This is my original design. Created and printed 6/2/25 Bowl/vase is 150mm high and 135mm wide,

Material is Amolen TerraCotta PLA, printed at 210C. Flow rate set at 12.

CAD drawing was made using Autodesk Fusion.

Slicer was Creality Print 6.1.2.2458

Printer used and shown in picture is the Creality K1C In this project it is using a 0.6mm nozzle. I choose to use the flat build plate with hair spray as the glue. 

Layer height was 0.2mm and all line width 0.62mm. Support was not necessary. Double layer walls with 15% infill.

Design time in CAD was between 60 – 90 minutes. No sketch as I had a good mental idea of how I wanted this to look, and a good idea how big I wanted.

Single .STL file, so no assembly required. 

Print time was 3hrs45min54seconds.